The basic set of the radio station includes:
- Transceiver with built-in controller DSC SRG-150DN;
- Antenna matching device SAT-100 with cable;
- Microphone SM-1150;
- Remote speaker;
- Alarm lamp;
- Junction cables;
- Working instruction;
- Set of wiring accessories.
Optionally supplied with:
- Whip transmitting antenna SAN-308;
- Whip receiving antenna SAN-30R;
- Battery charger SP-1250ADC
- Telex terminal SN-100
Features:
- Meets ITU standards (ITU-R.493-14,M.541-10), IMO and GMDSS.
- The quality of the sound is higher thanks to a new SYNTHESIZE technology with improved noise reduction.
- An embedded digital filter with DSP eliminates outside and inside noises, significantly improves link quality.
- Compact size with simplified keyboard and dial for easy usage.
- It is arranged as a single-component DSC and W/K-receiver which is built in a desktop transceiver .
- 10,4-inch color LCD screen is used for reading messages from TERMINAL NBDP.
- Quick scan function is available for changing output signal, frequency and transmission channels individually or in groups.
- Memory for 100 transmitted messages
- Memory for 100 messages received by DSC (emergency:50 messages and Regular:50 messages)
- A built-in loudspeaker( the remote loudspeaker is also available)
Frequency range:
- TX: 1,6 МHz~ 27,5 МHz, 10 Hz STEP / RX: 500 kHz ~ 29,9999 МHz, 10 Hz STEP • Channel TX / RX: channel ITU, 300 memory channels
- Frequency fluctuation: ± 10 Гц|
- Radiation type: J3E, F1B, J2B
- Mode of communication: simplex, half-duplex
- Operating temperature, humidity: -15˚C ~ + 55˚C, 95%
- Power supply: DC24V ± 15%
- Current consumption: SRG-150DN 2.0A during receiving , 15A during transmitting SRG-250DN 2.0A during receiving, 25A during receiving.
Transmitter
- Radiation type and output: SRG-150DN J3E, J2B (150 W) / SRG-250DN J3E, J2B (250 W)
- On-off system: balanced on-off system with low power level
- Frequency band: J3E 3 kHz, J2B within 0,5 kHz
- Emergency alarm 2TONE: 1300Hz, 2100 Hz
Receiving box
- Receiving sensitivity: J3E, F1B, J2B 3 мкВS / N 20 dB 250 m / W
- Intermediate frequency: 64,455 МГц, 455 КГц
- Signal/ noise: more than 20 dB• Input resistance: 50 Оhms
DSC scanning receiver
- Frequency: 2187,5, 4207,5, 6312, 8414,5, 12577, 16804,5 kHz
- Emission type: F1B
- Frequency-shift keying: 1700 ± 85 Hz (symbol: 1615 Hz, space: 1785 Hz)
- Data-transfer rate: 100 baud
- Frequency step: 10 Hz
Telex terminal
- Record: recommendations CCIR 625, 476-4, 490, 491, 492-3 and F130
- Communication mode: ARQ / CFEC / SFEC
- Storage space: 16 МB
- Intermediate frequency: 1700 Hz
- Modulation rate : 100BAUD (ARQ, FEC MODE)
- Modulation system: AFSK
- Frequency fluctuation: ± 0,5 Hz
Telex terminal components
- Terminal NBDP (SN-100)
- Printer(JP-3750 or HP-283)
- Keyboard (SPR-8630)