LOG JRC JLN-740/JLN-741

Doppler log from JLN-740 / JLN-741 batch meets the IMO MSC.96 (72) standards, it is used for vessels weighting more than 300GT. Besides speed measurement accuracy, JLN-740 is equipped with bubble sensor that warns you when speed measurements might not be accurate due to the contact with air bubbles. A model with color LC-sensors for main and auxiliary displays is also available. It allows to view an important information and adjust the brightness of the display in one place.
Accurate tracking of the ship's speed.
Due to combination of digital signal processing, optimization of existing measurement methods and sensor accuracy water velocity is measured with an accuracy of 0,3 kOhm in all models of JLN-741 batch.
A long intractable problem with doppler systems of water velocity measurement was accuracy reduction caused by bubbles formation touching measuring device at the bottom of the ship. JLN-740 batch detects when air bubbles touch the sensor and, using patented JRC technology, warns you about reduction of measurement accuracy through the display. A visual inspection of the device has to be made to confirm the source of the problem. However, if air bubbles are detected on board it helps to avoid an unnecessary preventive maintenance.
JLN-740 batch meets the  IMO MSC.96 (72), A.824 (19) и A.694 (17) standards and it is used on the ships weighting more than 300GT and meets following standards:
IEC 60945 (2002)
Marine equipment for measuring speed and distance (SDME)
IEC 61023 (2007)
Presentation of navigation information on the ship's navigation displays
IEC   62288 (2014)
Digital interfaces - one speaker and a number of listeners
IEC61162-1 (2010)
Digital interfaces - Ethernet connection
IEC61162-450 (2011) * 2

Displays: two types, color LC-display with design similar to Satellite Log JLN-720 design and black and white display based on NWZ-4610.*1*2
Color LC-display guarantee high visibility and efficiency JLN-720.
There are two types of units: four-section and three-section versions.
1. The first one, consisting of 4 sections, is intended for big ships that require data exchange such as radar and ECDIS for navigation equipment.
2. The second one, consisting of 3 sections, is applicable for smaller ships. 4 combinations are available depending on essential usage.

  • Standard equipment
  • The main display (color LC-display/ 4,5-inch monochrome LC-display)
  • Distribution processor ( JLN-740A/ N)
  • Signal processor
  • Sensor with fastening
  • Remote display (MID) (monochrome LC-display)
  • Analog display
  • Distance recorder
  • Dimmer
  • Flap (option)
Order